Aiwa XR-H33MD - Manual (Page 25)

NOTE
• Set the tape to the point where recording will start.
• The reverse mode is automatically set to "
".
Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded on first facing out from the unit.
3 Press the TAPE/DECK 1/2 button to select deck 1.
"TAPE 1" is displayed.
4 Press
z z TAPE REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing.
Press
„.
DUBBING THE WHOLE TAPE
This function allows you to make exact copies of both sides of the original tape.
NOTE
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to "
".
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded on first facing out from the unit.