ATTO Technology ATTO FibreBridge 4500R/D - Manual (Page 2)

F i b r e C h a n n e l
Backup Method
Provides 95%
CPU Availability
Provides 45%
CPU Availability
Serverless
Standard
1
1
2
2
3
4 3
4
5
ATTO FibreBridge ™ 4500R/D
Fibre Channel and SCSI
Fibre Channel Interface:
• 1.0625-Gigabit (200 MB/sec. in full-duplex mode)
• Three (3) independent SC optical ports
• Full support for direct connect to
F-port fabric switches
• Class 2, Class 3 ANSI Fibre Channel
specifications
• PLDA, public loop login (NL_ports) and
fabric direct connect (N_port)
• Full-duplex transmissions
• FC Chip: Qlogic ISP2200A
SCSI Interface:
• Four (4) independent VHDCI
SCSI connectors
• Supports LVD Ultra2 or HVD UltraSCSI
• LVD Ultra2 SCSI – 80 MB/sec. max.
per channel
• HVD UltraSCSI – 40 MB/sec. max.
per channel
• Backward compatible with all
Single-Ended SCSI (LVD only) devices
• 128 LUNs per channel
• HVD SCSI Chip: LSI Logic SYM53C896
• LVD SCSI Ship: LSI Logic SYM54C1010
Performance:
• Up to 1.5 TB/hr.
• 300 MB/sec. maximum data-transfer rate
• Up to 280 MB/sec. sustained
data-transfer rate
• Memory: 64 MB of SDRAM
• Support for 2 concurrent XCOPY commands
Fibre Channel Compliance:
• ANSI FC-AL
• SNIA Extended Copy
• Class 2 and Class 3
Management
Device Management Physical Interface:
• In-band (through Fibre Channel)
• Serial through RS-232 port
• Network through 10/100 BaseT Ethernet
Port (Telnet, FTP and SNMP)
Device Management User Interface:
• Command Line Interface (CLI)
• ASCII-based menu system
• ATTO BridgeTools™ Java-based application
• Tag Command Queuing supported
• Performance reporting/Error logging
LEDs:
• Power
• Ready
• Fault
• FC activity port 0, 1, 2
• SCSI activity bus 0, 1, 2, 3
Environmental and Physical
Characteristics
Dimensions:
16.725" W
10.000" L
1.720" (1U) H
Operating Environment:
• Temperature: 5-70º C
• Humidity: 0-90% non-condensing
Power:
• Input: 85-250 VAC
50/60 Hz
Max 2.0 A @ 110 VAC
• Rated: 90-132 VAC; 175 - 264 VAC,
47-63Hz, single phase
• Reset button
Configuration:
• Desktop (with attached feet)
• 19" Rack mount kit included (mounting
brackets)
Airflow:
• Internal fans provide 11 CFM
internal air flow
• Ambient air not to exceed 70º C
• Front to back
• Optional side to side
Other
Operating Systems Supported:
• Operating system independent
Agency Certifications:
• FCC Class A
• CE (EN55022/EC50082)
• CSA
•Flash: 2 qty. 16-Mbit to store Xilinz configu-
ration and i906, 2200 and 896/1010
firmware
• Internal 66 MHz PCI bus
©2002 ATTO Technology, Inc. Specifications subject to change without notice. PRMA-0272-000
Figure 2 - Rear Panel View
Figure 1 - Serverless Backup
Fibre Channel Ports
Serial Port
Ethernet Port SCSI Ports