Avaya P330-ML-ML - Manual (Page 91)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 77
The syntax for this command is:
set logging server condition { all | <application> } { none |
<severity> } <ip-address>
all A keyword signifying that the specified severity threshold
applies to all applications.
application The application to which the filter applies. Possible values are:
• BOOT
• SYSTEM
• ROUTER
• CONFIG
• FILESYS
• FAN
• SUPPLY
• SECURITY
• CASCADE
• QOS
• SWITCHFABRIC
• LAG
• VLAN
• SNMP
• POLICY
• CLI
• STP
• THRESHOLD
• CONSOLE
none A keyword signifying that logging messages are not logged to
the Syslog server regardless of the severity of the message.
severity The minimum severity of the logging messages that are logged
to the Syslog server. Possible values are:
• Emergency
• Alert
• Critical
• Error
• Warning
• Notification
• Informational
• Debugging
ip-address The IP address of the Syslog server.