LG HR570S - Manual (Page 43)

43 Installation
Ins
talla
tion
3
Initialize
[Factory Set]
You can reset the recorder to all its factory
settings. Some options cannot be reset
(Rating and Password). The [Setup Wizard]
menu appears on the screen after the
factory settings.
NOTE
• If you reset the unit to its original factory settings
using [Factory Set] option, you have to set the
network settings activation again.
• The [Initialization] option is not available while
recording or [Lock] in the [Setup] menu is set to
[On].
• If you select [Factory Set] in the Setup menu, All
the channels will be deleted.
[Internal HDD Format]
Everything recorded on the HDD will be
erased.
1. Press HOME.
2. Use
U/u/I/i to select [Setup] in the
[Home] menu, and press ENTER ( ).
3. Use U/u to select [OTHERS] option from the
[Setup] menu, and press ENTER ( ).
4. Use U/u to select [Initialize], and press
ENTER ( ) to display the sub-options.
5. Use U/u to select [Internal HDD Format],
and press ENTER ( ).
Select [No] and press ENTER ( ) to cancel.
6. Use
I/i to select [Yes], and press
ENTER ( ) to start the HDD format.
Select [OK] and press ENTER ( ) to return
to the previous step.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update
server (see page 101-102).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 107.
Auto Power Off
The screen saver appears when you leave
the player in Stop mode for about five
minutes. If you set this option to [On], the unit
automatically turns itself off after the Screen
Saver is displayed for 25 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
NOTE
If you set [Auto power off ] to [On], the unit will be
turned off automatically after displaying [No signal]
or [Not programmed] message for 30 minutes.
Power Save Mode
Selects whether this recorder is in power
save mode when the power is turned off. This
option is not available when a timer recording
is set.
[On]
The front panel display is off and only
signals arriving at the antenna input are
passed through when the recorder is
turned off.
[Off]
Turns off the [Power Save Mode] function.