AT&T CL2909 - Manual (Page 23)

17
Telephone operation
17
Telephone operation
Flash/call waiting
If you subscribe to call waiting service with your
local telephone service provider, you can answer a
new incoming call without losing your current call.
While on a call, press FLASH to connect to the
new call when you receive a call-waiting signal.
Press
FLASH again to return to the original call.
NOTEs:
Use FLASH to access other phone company
subscriber services, as described by your
telephone company.
The telephone cannot display the information
if another telephone on the same line is in use.
Make sure all extensions are not in use.
Hold
Press HOLD to put a call on hold.
The CALL INFO indicator will flash slowly to
indicate the call is on hold. To return to the call:
Press HOLD again.
-OR-
Lift the handset.
-OR-
Press SPEAKER.
-OR-
Pick up the call at another extension connected
to the same telephone line.
Mute
Press MUTE to prevent the other party from
hearing you but you will still be able to hear the
other party. Press
MUTE again to return to your
two-way conversation.
1.
2.
•
•
•
•
LOWER
LOWER
LOWER