HP Серия принтеров HP Designjet T1300 ePrinter - Manual (Page 20)

NOTE: A firmware update is downloaded in the background: the product can be printing at the
same time. However, it cannot be installed in the background: printing must stop.
● You can configure the product to download firmware updates automatically whenever they
become available: see Configure firmware updates on page 14 .
The following options are available if you choose manual firmware updates.
● Using the Embedded Web Server, select the Firmware update maintenance tab and then
Firmware update. Press Check now to check whether new firmware is available. If new
firmware is available, some information about the new firmware is displayed, and you are given
the opportunity to download and install it.
● Using the front panel, press , then , then Firmware update. Press Check now to
check whether new firmware is available. If new firmware is available, you are given the
opportunity to download and install it.
NOTE: If the product icon appears as , the product has already detected that new
firmware is available.
● Using HP Web Jetadmin, with which you can make manual firmware updates or request automatic
updates.
● Using a USB flash drive. Download the firmware file from the HP Web site into the USB flash drive
and insert it into the Hi-Speed USB host port beside the front panel. A firmware update assistant
will appear on the front panel to guide you through the update process.
● Using the HP Utility under Windows, select your product, the Support tab and then Firmware
Update.
● Using the HP Utility under Mac OS, select Firmware Update in the Support group.
The firmware includes a set of the most commonly used paper presets. Extra paper presets can be
downloaded separately; see Using your product.
ENWW Update the firmware 15
Firmware updates