HP Серия принтеров HP Designjet T1300 ePrinter - Manual (Page 21)

7 Control access to the product
Front-panel security settings
From the front panel, you can press , then , then Setup > Security, to control access to the
product in various ways.
● USB drive: Enable or disable the use of a USB flash drive.
● Firmware upgrade from USB: Enable or disable firmware updates from a USB flash drive.
● Direct print using HP ePrint & Share: Enable or disable Direct Print using HP ePrint &
Share.
● Enable Internet connection: Enable or disable the Internet connection.
● Printer access control: Enable, disable or change the administrator password.
If an administrator password has been set, it must be given in order to perform the following
operations.
● Change the security settings (including the administrator password itself)
● Change the configuration of the Internet connection
● Change the Automatic Firmware Update configuration
● Enable or disable automatic downloading and/or installation of automatic firmware updates
● Restore an earlier firmware version
● External hard disk options
● Reset factory defaults
NOTE: The administrator password can contain only characters that appear on the front panel's on-
screen keyboard. If you set a new password with the Embedded Web Server, it will reject characters
that do not appear in that limited character set.
16 Chapter 7 Control access to the product ENWW
Access control