Setup requirements, 2 setup requirements – HP Серия принтеров HP Designjet T1300 ePrinter User Manual
Page 8
Advertising
2 Setup requirements
1.
Make sure that your product is correctly connected to the Web. At the front panel, press
,
then
, then Connectivity > Connectivity wizard.
NOTE:
If you cannot see the Connectivity wizard in the Connectivity menu, please upgrade your
firmware manually to the latest version and try again. See
Update the firmware on page 14
2.
When the Connectivity wizard has finished, make sure that you have the latest firmware for your
product. Press
, then
, then Firmware update > Check now. If the check finds a
new firmware version, please install it to take advantage of the latest features.
ENWW
3
Setup
Advertising
This manual is related to the following products: