HP Matrix Operating Environment Software User Manual
Page 40
To view zones of a network:
1.
In the Navigation tree, select Networks under the Resources heading.
The list of available networks appears in the content pane.
2.
From the content pane, select the appropriate network.
The properties for the selected network are displayed.
3.
Click the Zones tab.
The zone settings are displayed.
NOTE:
Select a zone in the list to view the endpoints in that zone.
Viewing and modifying network capability settings (Capabilities tab)
To view or modify the capability settings of a network:
NOTE:
Capabilities that the network does not support cannot be selected. If a network supports
a capability but the user would like for SPM not to utilize it, deselect the check box.
1.
In the Navigation tree, select Networks under the Resources heading.
The list of available networks appears in the content pane.
2.
From the content pane, select the appropriate network.
The properties for the selected network are displayed.
3.
Click the Capabilities tab.
The capability settings are displayed.
4.
To edit these settings, click Edit Network.
The Edit Network window appears.
5.
On the Capabilities tab, make any necessary changes. When all changes are complete, click
Apply. If additional changes are required on other tabs, click the appropriate tab. When
finished, click OK.
Viewing and modifying network security settings (Security tab)
To view or modify the security settings of a network:
1.
In the Navigation tree, select Networks under the Resources heading.
The list of available networks appears in the content pane.
2.
From the content pane, select the appropriate network.
The properties for the selected network are displayed.
3.
Click the Security tab.
The basic settings are displayed.
4.
To view the access control settings, click Access Control....
The Access Control window appears.
5.
To edit the access control settings, click Edit Array, then click Access Control.... Make the
necessary changes and click OK.
6.
To view effective permissions, click Effective Permissions....
The Effective Permissions window appears. When finished, click OK.
7.
To edit additional security settings, click Edit Network.
The Edit Network window appears.
40
Managing storage catalog entities