American Audio TTB-2010 - Manual (Page 2)

TTB-2010 User Instructions page 2
User Instructions
Thank you for purchasing this American DJ
®
product. The TTB-2010 requires
some assembly. Please read the following instructions before installing or
using your new unit. The TTB-2010 has a 2 year limited warranty!
CAUTION! - Keep this device away from rain and moisture!
Name of Parts
1. 45-rpm Adapter
2. Turntable Platter
3. Center Spindle
4. Power Switch
5. Start/Stop Button
6. Strobe Dots
7. Target Light
8. Center detent
9. Headshell
10. Speed Select Button
11. Pitch Adjustment (+/-10%)
12. Pitch Control Slider
13. Tonearm
14. Anti-skate Knob
15. Counterweight
16. Spare phono cartridge slot
17. Hinge for dust cover
18. Right RCA output jack (red)
19. Left RCA output jack (white)
20. Ground (GND)
21. Remote Start/Stop 1/4” output
jack
Before Use
Check for the following parts included
in the package with the main unit.
• Turntable Platter • Slip mat
• Dust Cover • 45-rpm adapter
• Counterweight • Headshell
• User instructions
VERY IMPORTANT!! - Do not forget to attach rubber belt to motor
for correct operation. After placing the Turntable Platter (2) onto the
turntable through the Center Spindle (3), move one of the large
windows on the Platter to top right corner. Attach rubber belt*
around motor (see fig.1).
(*Rubber belt is already attached to the underside of the Turntable Platter.)
NOTES:
•
Do not connect the AC power plug before assembly has been
completed.
• Before turning the power on, make sure once again all the
connections and power voltage settings are correct. Always
turn off the power when connecting or disconnecting.
• Read this manual carefully before using the unit. Be sure to
store the manual in a safe place for future reference.
R L GND REMOTE BACK PANEL
21 20 19 18
Warranty & Service
The TTB-2010 has a 2 year limited
warranty. Mail in warranty card as
soon as possible.
For service, contact your local
American DJ® Dealer.
(fig.1)