HP Matrix Operating Environment Software - Manual (Page 27)

5. Specify Operations Orchestration information as described below, then click Next to complete
the installation.
•
In the Host Name or IP Address field, enter the IP address of the Operations Orchestration
CMS machine from which Operations Orchestration Studio was downloaded.
•
In the HTTP Port Number (usually 80 or 8080) field, change the value to 16080.
•
In the HTTPS Port Number (usually 443 or 8443) field, change the value to 16443.
Configuring Operations Orchestration Studio on a remote computer
To configure Operations Orchestration Studio on a remote computer:
1.
Make a backup of the rc_keystore file on the CMS
2. Copy the rc_keystore file installed on the CMS (..\Program Files\HP\Operations
Orchestration\Central\conf\rc_keystore
) to the same path on the remote
Operations Orchestration Studio system (..\Program Files\HP\Operations
Orchestration\Studio\conf\rc_keystore
), overwriting the existing instance of that
file.
3. Restart Operations Orchestration Studio.
4. In that same directory, open studio.properties and change the value in
dharma.studio.ui.input.constant.max.chars
to 65536.
5. When launching Operations Orchestration Studio, enter “admin” as the user name and enter
your CMS password.
Copying keystore file after upgrading Operations Orchestration
After upgrading Operations Orchestration from version 7.51 to 9.0, Operations Orchestration
Central and Studio have different certificate keys. Operations Orchestration Studio cannot access
the URL https://<cms-name-or-ip>:16443.
1.
Make a backup of the rc_keystore file on the CMS.
2. Copy the rc_keystore file installed on the CMS (..\Program Files\HP\Operations
Orchestration\Central\conf\rc_keystore
) to the same path on the remote or
upgraded Operations Orchestration Studio system (..\Program Files\HP\Operations
Orchestration\Studio\conf\rc_keystore
).
3. Restart Operations Orchestration Studio.
Configuring HP Operations Orchestration 27