Onlinespare, Logical drive category, Arrayaccelerator – HP ProLiant DL380 Server User Manual
Page 43: Logicaldrive, Arrayaccelerator logicaldrive
OnlineSpare
The value for this option determines whether the array specified previously in the script will be
configured with spare drives.
Default value
Possible values
Method mode
In Configure action mode: None
To specify exactly which drives to use
as spares, use the applicable
Custom
In Reconfigure action mode, ACU
ignores any value entered for this
convention (port:ID, box:bay, or
port:box:bay).
option and keeps any spares that are
already present in the configuration
To specify only the number of spares
(not the exact IDs), enter that number
as the value for this option. ACU
automatically selects only those drives
that are suitable for the array.
To specify that the array should not
have spares, enter None.
In Configure action mode: Yes
(indicating one spare)
Yes (indicating one spare)
No
Auto
In Reconfigure action mode, ACU
ignores any value entered for this
option and keeps any spares that are
already present in the configuration
Logical Drive category
The Logical Drive category has the following options:
•
•
•
“LogicalDriveSSPState” (page 44)
•
•
•
•
•
•
“SSPAdaptersWithAccess” (page 45)
•
ArrayAccelerator
This option specifies whether the array accelerator is enabled or disabled for the specified logical
drive. The default value is Enabled.
LogicalDrive
The value that you enter for this option specifies the ID number of the logical drive that is to be
created or modified. The first logical drive on an array must have an ID of 1 (not 0), and logical
drive numbering must be contiguous.
•
In Configure action mode, ACU accepts only the ID number of the next possible logical drive.
•
In Reconfigure action mode, ACU also accepts the ID number of any existing logical drive.
Using HPACUSCRIPTING
43