2 deployment using the scripting toolkit, Deployment overview, Sample deployment procedure – HP ProLiant DL380 Server User Manual
Page 7: Deployment overview sample deployment procedure
2 Deployment using the Scripting Toolkit
Deployment overview
The Scripting Toolkit includes a set of utilities for configuring and deploying servers in a customized,
predictable, and unattended manner. These utilities enable you to duplicate the configuration of
a source server on target servers with minimal user interaction.
IMPORTANT:
HP ProLiant 100 series servers do not support all toolkit commands. See the following
descriptions for utility usage. Commands that are supported might not work as expected. For a
better understanding, read each section of the documentation carefully.
You can perform server deployments in many different ways using the Toolkit, but every deployment
must include the following basic steps:
1.
Create a network share.
2.
Prepare the bootable media (CD/DVD, USB drive key, or PXE).
3.
Configure the system and storage hardware on the target server.
4.
Perform the operating system installation.
HP also recommends installing the latest version of the HP SPP. To obtain the most current SPP, see
the SPP website
.
IMPORTANT:
Not all options can be configured using Toolkit utilities. Some options must be
configured manually or with other configuration utilities, which are available online, before they
can be used with the Toolkit. For more information on configuration, see the option documentation.
Sample deployment procedure
The following procedure is a case study of a typical deployment. This procedure assumes that you
are performing a CD-based installation and that you want to replicate an existing server
configuration. The process described in this section can vary depending on your specific
requirements.
This section provides a simple overview of a basic deployment, but the flexibility of the Scripting
Toolkit enables you to do much more. With an understanding of the basic steps and your own
deployment environment, you can use the Toolkit to further customize and automate the deployment
process. For information on automating deployments, see
“Booting and OS installation” (page
Deployment overview
7