HP ProLiant Support Pack (User Guide) - Manual (Page 27)

/override_existing_connection /continue_on_error ServerNotFound
/silent /logdir "Management_Server_Files"
•
hpsum /target "Management Server1" /target "Management Server2"
/target "Management Server3" /user administrator /passwd letmein
/use_latest /allow_update_to_bundle /allow_non_bundle_components
/force:all /override_existing_connection /continue_on_error
ServerNotFound /silent /logdir "Management_Server_Files"
Results: All software components and firmware components from the update bundle,
cp008097.exe,
and cp008257.exe were installed on Management Server1, Management
Server2, and Management Server3.
Return codes
HP SUM has consolidated return codes from Linux and Windows smart components into a new,
enhanced return-code mapping. These return codes determine the status of the component
installation. You can also use return codes in a script to control the execution of the script and
determine any required branching.
In Linux, the negative return codes are reported. These return codes are determined by subtracting
the negative value from 256.
Text Windows Linux Value Return code
The installation was successful. 0 0 0 SUCCESS_NO_REBOOT
The installation was successful, but a
reboot is required. 1 1 1 SUCCESS_REBOOT
The component was current or not
required. 3 3 3 SUCCESS_NOT_REQUIRED
A general failure occurred. For details,
see the error log. 255 255 -1 FAILURE_GENERAL
A bad input parameter was
encountered. 254 254 -2 FAILURE_BAD_PARM
The installation of the component
failed. 253 253 -3 FAILURE_COMPONENT_FAILED
Windows smart-component return codes
Meaning Error level
The smart component was not installed. For more information, see the log file. 0
The smart component was installed successfully. 1
The smart component was nstalled successfully, but the system must be restarted. 2
The installation was not attempted because the required hardware is not present, the
software is current, or there is nothing to install. 3
Linux smart-component return codes
Single-target servers:
Meaning Error level
The smart component was installed successfully. 0
The smart component was installed successfully, but the system must be restarted. 1
Command-line interface 27