ADTRAN 1200214L1 - Manual (Page 52)

32 IQ Probe User Manual 61200214L1-1
Chapter 4. Applications
SHARED if the DLCI is used to carry customer traffic as well as
management data. This option is found in the DCE Port Con-
figuration menu.
The IQ Probe unit supports management from two network DLCIs
either shared or dedicated.
The next five settings are applicable for SNMP access only:
Read Community
Set the Read Community name to match the NMS settings.
Write Community
Set the Write Community name to match the NMS settings.
Trap Manager DLCI
Identify the virtual circuit used for all traps generated by the IQ
Probe. This selection is found under TRAP MGR OPTIONS in
the SYSTEM portion of the CONFIGURATION menu.
Trap Manager IP Address
Enter the IP address of the SNMP manager to which the IQ
Probe sends traps. This selection is found under TRAP MGR
OPTIONS in the SYSTEM portion of the CONFIGURATION
menu.
Trap Manager Port
Select DCE PORT. The port will then be used to transmit traps
to the SNMP manager. This selection is found under TRAP
MGR OPTIONS in the SYSTEM portion of the CONFIGURA-
TION menu.
You may assign up to five possible trap destinations in the TRAP
MGR OPTIONS table.
Dedicated PVC Management
Dedicated PVC management refers to the ability to have a PVC
originated from the network and terminated in the IQ Probe.
This is an ideal configuration for third-party management. It
isolates the customer’s data traffic from network management