Avenview FO-DVI-1080LC-Set - Manual (Page 5)

www.avenview.com 5
1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.
1.7 Installation
This product is composed of a transmitter and a receiver. The transmitter should be connected to the
computer’s DVI Port and the receiver should be connected the DVI Port of the digital display device. Avenview
FO-DVI-1080LC Transmitter is designed to be used with the LC type standard optical cable. It is marked with R,
G, B, O. Connect “R” to Red color, “G” to Green color, “B” to blue and “O” to orange color connector.
Connection diagram of FO-DVI-1080LC
Use the DC adapter (included in the package) for the Receiver. The Transmitter which is
connected to a computer uses power from the computer.