HP ProLiant Essentials Intelligent Networking Pack Windows Edition User Manual
Page 14
Using Virus Throttle 14
configuration parameter is changed. Statistics and delay queue information can be viewed on the Status
tab in either Aggregate (summary for all active instances of the Virus Throttle filter driver) or Individual
(per instance) mode. The default setting is the Aggregate mode.
•
Status. Displays the current state and the number of interfaces with virus-like activity since the Virus
Throttle filter drivers were initialized. The filter drivers are initialized upon reboot and when any
configuration parameter is changed.
o
No Virus-like activity is occurring. No virus-like activity is currently detected and none has been
detected since the filter drivers were initialized.
o
Virus-like activity is not occurring, but has occurred in the past. No virus-like activity is currently
detected, but virus-like activity has been detected since the filter drivers were initialized.
o
Virus-like activity is currently occurring! Virus-like activity is currently detected by at least one
instance of the filter drivers.
o
Number of TCP Interfaces with Virus-Like Activity. The number of TCP interfaces that are currently
displaying virus-like activity.
•
Number of UDP Interfaces with Virus-Like Activity. The number of UDP interfaces that are currently
displaying virus-like activity.
•
TCP Statistics. Displays statistics on an aggregate or per-instance basis since the filter drivers were
initialized.
o
Connection Establishing TCP Packets. Number of connection TCP packets seen since filter driver
initialization.
o
TCP Packets Passed Without Delay. Number of connection TCP packets that were passed without
a delay because the target was a known host since filter driver initialization.