Acoustic Research ARRX18G - Manual (Page 17)

Activities 17
A
ctivitie
s
3 Test the Hello activity with your devices.
Once your remote is ready to test, the screen to the right appears.
Carefully disconnect the remote from your PC. The remote screens guide you
through testing this activity.
Test individual power commands
The second screen lets you test the power command you set for each device.
Press the on-screen remote button for each device to see if it turns that device
on. (If it does, make sure you turn it back off!) Only the first three devices are
shown on this page. Use the slider to test the rest of your devices.
IMPORTANT: If you notice one of your devices does not respond to the power
command, make a note—you will need to change the power command you give
to that device.
Under your last device, there’s is an on-screen OK button. Press OK to continue
with the test. 12:35
DirecTV Satellite Box
Onkyo DVD
Sony TV
12:35
OK
Harmon/Kardon
Audio
Read about the test
The first screen gives you some information about the test. Use the slider to go
to the next screen.
IMPORTANT: Make sure all your devices are off before you start.
12:35
Press the power
button on the next
page to turn off or
on your devices in
this activity.