ATTO Technology 2600R/D - Manual (Page 2)

Rev 2/08 ©2008 ATTO Technology, Inc. Specifications subject to change without notice
Technical Specification
Power Behind the Storage
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Gigabit Ethernet and SCSI
Gigabit Ethernet Interface
•
Four independent 100/1000 Gig-E RJ45 Ethernet ports
•
Supports IP v.4
•
Compliance with IEEE802.3ab Gig-E
•
Supports Microsoft iSCSI Initiator
SCSI Interface
•
Dual independent Ultra320 LVD/SE SCSI bus ports
•
Backwards compatible with all single-ended SCSI devices
Management Interface
•
RJ-45 connector for Ethernet management port
•
RS-232 serial header console port
Management
Operating Environment
•
Operating system independent
•
Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
Local and Network Management
•
ExpressNAV TM web-based management console for remote configuration, management and diagnostic
capabilities
•
Local diagnostics supported through CLI, SNMP, Telnet, FTP and SCSI Enclosure Services (SES)
•
Command line and menu-based ASCII text management access via Ethernet management port
•
Access Control Lists (ACLs)
•
Virtual LAN (VLAN) Support
Agency Approvals (Pending)
Safety and Environmental
•
FCC Class A
•
CE EN55022
•
CE EN55024
•
CE 60950
•
RoHS Compliant
Environmental & Physical Specifications
Dimensions
•
1.579” (1U) H x 16.494” W x 10.000” L
Operating Environment
•
Operating: 5-40° C
•
Humidity: 10-90% non-condensing
Storage Environment
•
Temperature: -40°-70° C
•
Humidity: 5—95% non-condensing
Power
•
[email protected]
Airflow
•
11 CFM recommended
•
Ambient air not to exceed 40° C
Ordering Information
Model Number
•
IPBR-2600-DR0
Accessories
•
Cables: CBL-0911-R01
iPBridge TM 2600R/D
iPBridge TM 2600R/D