Select ldev window, Figure 49 – HP XP Data Shredder Software User Manual
Page 91
number. To display only CUs defined for the selected SLPR, select the Limited check box. To display
all CUs, regardless of the SLPR, clear the check box. By default, the Limited check box is selected.
•
Select LDEV button
Displays the Select LDEV window (
) where you can select the first CU:LDEV number in
the series.
•
Select Paths button
Displays the Select Paths pane (
). Use the Select Paths pane to select paths as candidates for
primary and alternate paths and select paths not set to primary and alternate paths. By default, all
paths with a confirmed connection status of normal are set as candidates for primary and alternate
paths. However, to set a specific path as the alternate path, specify candidates for alternate paths on
the Select Paths pane. Alternate paths are automatically set from the candidates, as many as the
number set in Alternate Path.
See
Mapping external LUs individually (Add LU)
for more information about settings on the Select
Paths pane.
CAUTION:
If you do not set alternate paths on the Select Paths pane, alternate paths are automatically set
according to the WWN selected in the Device tree on the LU Operation pane when you start the
Add LU operation.
•
OK button
Starts mapping internal CU:LDEV numbers to external LUs. When mapping is complete, the SSID
window appears if the SSID setting is required. If the SSID setting is not required, the Auto Map
Setting window closes, and the LU Operation pane appears.
•
Cancel button
Cancels all mapping operations, closes the Auto Map Setting window, and returns to the LU
Operation pane.
Select LDEV window
Figure 49 Select LDEV window
•
CU list
CU number of the local array to which you want to map the external LU.
External Storage XP user guide
91