Audiovox GMRS121-2 - Manual (Page 7)

128-7005
7 of 20
7
Installing the batteries:
Battery installation is made more convenient when the carry clip is rotated
either left or right to the upside-down position, or is removed completely.
Simply rotate the clip in either direction to the vertical position. Be careful
not to use excessive force. To remove the clip, press down on the the
release tab and pull the clip straight out from the radio body. Next, press
down with the thumb at the embossed arrow, slide the battery cover down
and lift it away from the compartment. Insert three AAA batteries (alternate
positive ends (+) toward the top of the transceiver, starting left-to-right).
2. Then lift cover at
bottom to open.
Remove cover.
3. Insert three AAA batteries
(positive (+) end toward
the top begining at left
side and alternating
positive terminals as
shown).
1. Using thumb,
press down on
battery cover at
arrow and slide
cover down.
+ +
+
CLIP RELEASE
TAB
BATTERY
COVER
CARRY
CLIP
COVER
ARROW
POSITIVE
TERMINAL
POSITIVE
TERMINALS