Synchronize remote site device info, Access remote site – HP Intelligent Management Center Licenses User Manual
Page 8
Precautions
•
After the maximum number of devices that can be managed by a remote site is modified on
the primary site iMC, the modification is automatically synchronized to the remote site, perhaps
with some delay.
•
The modified value cannot be smaller that the number of devices currently managed by the
remote site.
•
The primary site iMC and all remote sites share the license, and the number of manageable
devices assigned to remote sites is considered used on the primary site iMC.
Related Topics
•
Modify Remote Site Info
•
Synchronize Remote Site Device Info
•
Access Remote Site
Synchronize Remote Site Device Info
This function allows you to manually synchronize device information of a remote site on the primary
site iMC.
Operation Procedure
1.
Click the Resource tab, and then select Remote Sites from the navigation tree to enter the
remote site list page.
2.
Click the Refresh icon
for a remote site to start synchronizing device information of the
remote site.
Precautions
•
This function synchronizes only device information and does not synchronize system
configuration information such as operator, which is automatically sent by the remote site to
the primary site iMC at regular intervals for synchronization.
•
The synchronization might take a long time, depending on the network conditions between
the primary site iMC and remote site. Click the Refresh button to see the synchronization result.
Related Topics
•
Modify the Maximum Number of Nodes Managed by a Remote Site
•
Access Remote Site
Access Remote Site
This function allows you to enter a remote site directly from the primary site iMC and then to
configure and operate the devices in the remote site.
Operation Procedure
1.
Click the Resource tab, and then select Remote Sites from the navigation tree to enter the
remote site list page.
2.
Click the IP address link for a remote site to enter the remote site page.
Precautions
Make sure that the primary site iMC and remote sites can communicate via HTTP and HTTPS.
8
Remote Site Manager