Linux-specific issues, Vmware-specific issues, Linux-specific issues vmware-specific issues – HP ProLiant DL320e Gen8 Server User Manual
Page 81
Linux-specific issues
•
When using the Manual installation method SUSE Linux Enterprise Server 11 SP3 with an SD
card, the GNU GRUB screen appears, and the OS installation is not completed.
Suggested action: Perform the installation outside of Intelligent Provisioning by installing the
DUD from HPSC. A future upgrade will support the installation using Intelligent Provisioning.
•
The system displays an “Unsupported Hardware detected” message when you perform a
Recommended installation of Red Hat Enterprise Linux 6.3 on an SD card.
Suggested action: Click OK in the dialog box. The installation will proceed normally and
concludes successfully.
•
When using the Recommended installation method for one of the following:
◦
Red Hat Enterprise Linux 5.8 or 5.9 with DVD source media
◦
Red Hat Enterprise Linux 5.9 with DVD/FTP as source media on a Smart Array (SA)
controller
◦
Red Hat Enterprise Linux 5.X or 6.3 with an iSCSI media source
◦
a Red Hat OS installation with FTP source media
you might encounter one of the situations listed:
◦
the installation hangs during reboot and a “The Red Hat Enterprise Linux Server CD was
not found” error appears.
◦
the installation hangs and a “Could not allocate requested partitions” error appears.
◦
the installation does not complete successfully, or
◦
the installation completes successfully even if there are missing flat files for the OS
installation.
•
Suggested action: To remedy any of the situations above, perform the installation outside of
Intelligent Provisioning by installing the DUD from HPSC .
VMware-specific issues
•
Only flat files are supported over FTP. ISO files are not supported.
•
A standalone NIC card on the motherboard of the server takes the position of eth0 and eth1,
pushing the embedded NIC to eth2 and eth3.
•
VMware ESX and ESXi Custom Image require a custom HP ISO.
Suggested action: Download the ISO from the VMware website.
•
For VMware ESXi 4.1 U2 Custom installations, the message No matching licenses appears.
Suggested action: On the OS information screen, either enter the correct license key or leave
the field blank. This field is optional.
•
On the OS Information screen for ESXi Custom installation, the Continue arrow is visible. If a
host name is entered in the Host Name field, the Continue arrow disappears.
Suggested action: Make sure the Host Name field contains at least three characters.
Linux-specific issues
81