Ayre Acoustics CX-7 - Manual (Page 6)

Digital Filter
Normally the selector switch is
set to the “Listen” position
when listening to music.
However in some situations,
the “Measure” position may
provide better overall sound
quality.
The digital filter of the Ayre CX-7 features two
user-selectable algorithms. A selector switch is
located on the rear panel. One algorithm produces
greater accuracy in the time domain and is labeled
“Listen”. The other algorithm produces greater
accuracy in the frequency domain and is labeled
“Measure”.
Digital Output
An adapter is available from
Ayre should you need to
connect the digital output to
an S/PDIF input that uses an
RCA connector.
The Ayre CX-7 features a balanced AES/EBU
digital audio output on the rear of the unit. This
may be used when connecting to a digital recording
unit or other device, such as an external
digital-to-analog converter (DAC). A switch on the
rear panel allows the digital audio output to be
turned off if its use is not required.
4
Right Digital Output Left
Volts
50/60 Hertz
50 W Max
Measure Listen On Off
Digital Filter
Boulder, Colorado USA
CX-7 Compact Disc Player
S.N.
A y r e