Air Oasis 5000 - Manual (Page 3)

AHPCO™ Cell Replacement
Step 1
CAUTION: Before attempting to service the Air Oasis 5000 unit, be sure
the power is off and unplugged.
DANGER - NEVER LOOK DIRECTLY AT ILLUMINATED AHPCO CELL
Step 2
2. (1) Pull the lamp connector
off of the AHPCO Cell. (2) Then
pull to one side. (3) Pull AHPCO
Cell at an angle up and out of the
bracket.
CAUTION
UV lamp may be hot and could
cause serious burns if not han-
dled properly. Please wait until
AHPCO Cell has cooled to room
temperature to remove from unit.
5 2
Read all instructions carefully before operating
your air purifier.
Table of Contents
Safety Instructions and Cautions 1
Table of Contents 2
Warranty 3
Maintenance and Customer Service 4
Placement and Operation 4
Cleaning 4
AHPCO™ Cell Replacement 5-6
Troubleshooting Guide 7