Tri pack system satellite mounting pole mounting – American Audio Tri Pack System User Manual

Page 11

Advertising
background image

©

American Audio

®

- www.americanaudio.us - Tri Pack System - Instruction Manual Page 11

Tri Pack System

Satellite Mounting

Pole Mounting –

The Impact 3 satellite speakers include a pole mount

option. The pole mount socket located on the bottom of the speaker may
be used to secure the speaker to a speaker tri-pod, such as the American
Audio

®

SPS-1B as illustrated on the left. Always be sure to follow the

guidelines listed below when pole mounting your speaker;
• Always be sure the stand is designed to support the weight of
the speaker
• In outdoor situations that are prone to windy conditions and
strong wind gust, be sure to use sandbags as additional tri-pod
support, this will greatly reduce the risk of tipping
• Do not stack speakers on top of each other when mounting on
a tri-pod. Only one speaker should be mounted to a tri-pod at one
time.
• Always position the tri-pod legs away from foot traffic
• Extend the tri-pod legs to their fully extended position to avoid
accidental tipping
• Observe and follow all safety guidelines and regulations specified
by the tri-pod’s manufacturer
• Be sure the tri-pod is situated on a flat, level, and stable surface
• Always tighten all tri-pod locks

Advertising