HP XP Racks - Manual (Page 220)

KAPL01057-I All the paths which pass the specified CHA port
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 2 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-chaid CHA-port-ID
Use this parameter to place online, at one time, all paths that pass
through a specific CHA port. The command will place online all paths
connected to the CHA port that has the specified CHA-port-ID. To display
the CHA port IDs, execute the following view operation:
# /usr/DynamicLinkManager/bin/dlnkmgr view -cha
For details about how to execute the view operation to display the CHA
port IDs, see To Display CHA Port Information on page 6-63 in
Parameters on page 6-34 .
Example
The following example shows how to place online all paths connected
to the CHA port whose CHA-port-ID is 00001.
# /usr/DynamicLinkManager/bin/dlnkmgr offline -chaid 00001
KAPL01104-I All the paths which pass the specified CHA port
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 15 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-pathid AutoPATH_ID
Use this parameter to place a single path online.
Specify the current AutoPATH_ID of the target path, which is displayed by
using the view operation. For details about the view operation, see view
(Displays Information) on page 6-32 . Leading zeros can be omitted
(000001 and 1 indicate the same AutoPATH_ID); however, when the
target AutoPATH_ID is 000000, enter 000000 or 0 for the parameter
value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you
want to add a new LU without restarting the host, AutoPATH_IDs are re-
assigned to each path of the LU when you execute the cfgmgr command.
Always make sure that you use the view operation to find the current
AutoPATH_ID of the target path, before executing the online operation.
-hdev host-device-name [-ospathid OS-management-path-ID]
Use this parameter to place online path connected to the specified host
device. If the -ospathid parameter is not specified, path with the
specified host device name are placed online.
For host-device-name, specify the value of HDevName.
For OS-management-path-ID, specify the value of OSPathID. Leading
zeroes can be omitted from the OS management path ID (00001 and 1
are the same value).
6-14
Command Reference
Hitachi Dynamic Link Manager User Guide for AIX®