HP BladeSystem Dual NC370i Multifunction Network Adapter - Manual (Page 13)

Configuration 13
5. Click the RDMA Enabled Devices tab to view the configured RDMA device.
6. Click OK to save the new RDMA device configuration. The following window appears.
7. Click Yes to continue with the configuration. The following window appears.
8. Click Yes to reboot the system. The Multifunction Server Adapter is now configured for RDMA
functionality.
After a Multifunction Server Adapter is enabled as an RDMA device, the device is displayed on the
RDMA Enabled Devices tab off the NCU Main window.
NOTE: When RDMA is enabled, multi-threaded applications may have reduced performance, such
as limited system resources or a lack of system responsiveness. No error message appears if this
situation occurs.