HP LaserJet 3020 All-in-One Printer - Manual (Page 82)

6. Click Save. The original is scanned and saved.
7. Click Done to close HP Scan.
Scanning to a software program
To scan to a software program, you scan an item using the program itself. Any TWAIN-
compliant program can scan an image. If the program you are using is not TWAIN-compliant,
you can save the scanned image to a file and then place, open, or import the file in the
software program. For more information, see
Scanning by using TWAIN-compliant and WIA-
compliant software .
Using page-by-page scanning
Note For best results, load originals in the automatic document feeder (ADF) input tray, not the
flatbed scanner.
1. Load the originals that are to be scanned face-up in the ADF input tray. Adjust the media
guides to hold the originals in place.
2. If the device is connected directly to your computer, the HP Director opens after you
insert an item into the automatic document feeder ADF input tray. If the HP Director does
not automatically open, double-click the desktop alias for the HP Director.
3. To open the HP Scan dialog box, click the HP Scan button in the HP Director.
4. Specify an image type.
5. Click Scan.
6. After the scan process has finished, click Scan next page.
7. Repeat step 6 for each page of the original.
8. After all of the pages have been scanned, click Send Now!.
OR
Click the Save As icon to save the pages to a file.
72 Chapter 5 Scanning ENWW