Display ios hyperpav command – HP XP7 Storage User Manual
Page 37
Advertising
Showing the host and subsystem configuration status
Use this task to show the status of the host and subsystem configuration.
Run the command using the following syntax:
DS QP,device_unit_ID,VOLUME
The following figure shows a sample output of this command.
DISPLAY IOS HYPERPAV command
The MVS DISPLAY IOS HYPERPAV command shows the current HYPERPAV enablement status.
Run this command using the following syntax:
HP Confidential
MVS commands to monitor Parallel Access Volumes
37
Advertising
This manual is related to the following products: