HP LaserJet Enterprise 600 Printer M603 series - Manual (Page 62)

Software for Mac
Supported operating systems and printer drivers for Mac
The product supports the following Mac operating systems:
● Mac OS X 10.5 and 10.6
NOTE: For Mac OS X 10.5 and later, PPC and Intel® Core™ Processor Macs are supported. For
Mac OS X 10.6, Intel Core Processor Macs are supported.
The HP LaserJet software installer provides PostScript ® Printer Description (PPD) files, Printer Dialog
Extensions (PDEs), and the HP Utility for use with Mac OS X computers. The HP printer PPD and PDE
files, in combination with the built-in Apple PostScript printer drivers, provide full printing functionality
and access to specific HP printer features.
Install software for Mac operating systems
Install software for Mac computers connected directly to the product
This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a
cable that is no longer than 2 m (6.5 ft).
1. Connect the USB cable to the product and the computer.
2. Install the software from the CD. Click the product icon, and follow the onscreen instructions.
If you did not add a pirnter during the CD install process, continue with the next step.
3. At the computer, open the Apple menu , click the System Preferences menu, and then click
the Print & Fax icon.
4. Click the plus (+) symbol in the lower left corner of the Printer Names column, select the product
from the Add Printer window, and then make sure that the product driver is listed in the Print
Using area.
46 Chapter 4 Use the product with Mac ENWW