Set job storage options with windows, Temporarily store a job on the product – HP LaserJet Enterprise 600 Printer M603 series User Manual
Page 155
can change the number of jobs that can be stored from the General Settings menu on the product
control panel.
Use this procedure to delete a job that is stored in the product memory.
1.
At the product control panel, press the Home button.
2.
Open the Retrieve Job from Device Memory menu.
3.
Select your username, and then select the name of the job or select the All Jobs (With PIN) or
All Jobs (No PIN) option.
4.
Select the Delete option. The product prompts you to confirm the deletion.
Set job storage options with Windows
Print one copy for proof before printing all the copies
1.
On the File menu in the software program, click Print.
2.
Select the product, and then click the Properties or Preferences button.
3.
Click the Job Storage tab.
4.
In the Job Storage Mode area, click the Proof and Hold option.
Temporarily store a personal job on the product and print it later
NOTE:
The product deletes the job after you print it.
1.
On the File menu in the software program, click Print.
2.
Select the product, and then click the Properties or Preferences button.
3.
Click the Job Storage tab.
4.
In the Job Storage Mode area, click the Personal Job option.
5.
Optional: In the Make Job Private area, click the PIN to print option, and enter a 4-digit
personal identification number (PIN).
6.
Print the job at any time from the product control panel.
Temporarily store a job on the product
NOTE:
This option is available if the optional hard disk is installed in the product.
NOTE:
The product stores the job until you turn the product off.
1.
On the File menu in the software program, click Print.
2.
Select the product, and then click the Properties or Preferences button.
ENWW
Additional print tasks with Windows
139