HP LaserJet Enterprise 600 Printer M603 series - Manual (Page 197)

Clear jams from the fuser area
Use this procedure only in these situations:
● Paper has jammed inside the fuser and cannot be removed from the top-cover area or the rear-
output area.
● A sheet of paper has torn while you were trying to clear a jam from the fuser.
1. Turn the product off.
2. Rotate the product so the rear is facing you. If
an optional duplexer is installed, lift it and pull
it straight out. Set it aside.
3. Disconnect the power cord.
WARNING! The fuser is very hot. To avoid
minor burns, allow the fuser to cool before
removing it from the product.
ENWW Clear jams 181