Change jam recovery – HP LaserJet Enterprise 600 Printer M603 series User Manual
Page 208
7.
Reinstall the print cartridge and close the top
cover.
8.
If a jam message persists, jammed paper is still
in the product. Look for the jam in another
location.
Change jam recovery
This product provides a jam recovery feature that reprints jammed pages. The following options are
available:
●
Auto — The product attempts to reprint jammed pages when sufficient memory is available. This
is the default setting.
●
Off — The product does not attempt to reprint jammed pages. Because no memory is used to
store the most recent pages, performance is optimal.
NOTE:
When using this option, if the product runs out of paper and the job is being printed on
both sides, some pages can be lost.
●
On — The product always reprints jammed pages. Additional memory is allocated to store the
last few pages printed. This might cause overall performance to suffer.
1.
At the product control panel, press the Home button.
2.
Open the following menus:
●
Administration
●
General Settings
●
Jam Recovery
3.
Select the appropriate setting, and then press the
OK
button.
192
Chapter 10 Solve problems
ENWW