HP LaserJet Enterprise 600 Printer M603 series - Manual (Page 63)

5. Click Add to create the printer queue.
NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should automatically configure
the installed options.
6. Print a page from any program to make sure that the software is correctly installed.
NOTE: If the installation failed, reinstall the software.
Install software for Mac computers on a wired network
Configure the IP address
1. Connect the network cable to the product and to the network.
2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3. At the product control panel, press the Home button.
4. Open the following menus:
● Administration
● Reports
● Configuration/Status Pages
● Configuration Page
ENWW Software for Mac 47