HP Integrity NonStop H-Series User Manual
Page 166
Using Marked Positions
Working With Larger Files
058060 Tandem Computers Incorporated
6–17
5.
Press *C. When the response line appears, type MARKPOSITION 2.
Command: MARKPOSITION 2
6.
Press *C again. The position is now marked.
To return to the letter to mark the third position, use the GOTOPOSITION
command to go back to the letter. Follow these steps:
1.
Press *C.
2.
Type GOTOPOSITION (or you can abbreviate it to GO) followed by the
position number you marked for the line. See the next example.
Command: GOTOPOSITION 1
3.
Press *C again. TEDIT places the cursor exactly on the position you
marked.
4.
Now scroll the text down until you see the line containing the other set
of names that change with each personalized letter. Put the cursor on
the line.
In addition, Sydney, the publisher would like you to
discuss your projections for the production department with
edici and Kitahara before presenting them at the meeting.
Thank you.
M