Figure 5-7, View of two fcsas at the rear of server – HP Integrity NonStop H-Series User Manual
Page 82
Installing and Configuring the Tape Drive for the HP
Integrity NonStop NS-Series Server
N1525A ACL Installation and User’s Guide — 527339-003
5 -6
Installation
8. Tighten the screws by hand to secure the terminator to the tape drive. Do not use a
screwdriver.
9. Attach the power cord to the AC power receptacle on the tape drive (see
for location), and then plug the other end into an AC power outlet.
10. Connect the other end of the fiber cable to the Fibre Channel ServerNet adapter
(FCSA) (see
for location) on the NonStop NS-series server.
Note. The tape drive does not have protection against lightning surges. Customers located in
high risk areas should use external surge protection rated for use in their location and be able
to handle the power demand of the tape drive.
Figure 5-7. View of Two FCSAs at the Rear of Server