HP XP Array Manager Software - Manual (Page 60)

Figure 34 The Change WWN & Name Dialog Box
Figure 35 The Dialog Box that Displays the Host Bus Adapters to be Changed
Deleting Host Bus Adapters from Host Groups
To delete an HBA from a host group:
1. Start LUN Manager and display the LUN Manager window ( Figure 4 on page 21).
2. In the tree, select and right-click a host bus adapter ( ).
A pop-up menu appears.
3. Select Delete WWN from the pop-up menu.
A message appears, asking whether you want to delete the host bus adapter (WWN).
4. Click the YES button to close the message.
5. Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
6. Click the OK button to close the message.
The settings are applied to the storage system.
Deleting Old WWNs from the WWN List
If you disconnect a host that has been connected via a cable to your storage system, the WWN for the
host will remain in the WWN list of the LUN Manager window. To delete the WWN from the WWN
list, take the following steps:
1. Start LUN Manager and display the LUN Manager window ( Figure 4 on page 21).
60 Performing LUN Manager Operations