HP XP Array Manager Software - Manual (Page 78)

Figure 39 The Concatenation List Dialog Box
Deleting LU Paths
Caution : Do not remove LU paths when host I/O is in progress.
To delete LU paths:
1. Start LUN Manager and display the LUN Manager window ( Figure 4 on page 21).
2. In the tree, double-click a port.
The corresponding host groups are displayed.
3. In the tree, select a host group.
The LU Path list displays information about LU paths associated with the selected host group.
4. In the LU Path list, select one or more LUNs to which volumes are assigned. If a volume is
assigned to a LUN, the columns on the right of the LUN column are not empty.
5. Right-click the selection and then select Release LU Path from the pop-up menu.
A message appears, asking whether you want to delete the specified LU paths.
6. Click the OK button to close the message.
The selected LU path is removed from the table.
7. Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
8. Click the OK button to close the message.
The settings are applied to the storage system and the specified LU paths are deleted.
78 Performing LUN Manager Operations