HP StoreVirtual 4000 Storage - Manual (Page 24)

Parameters
Description Name
The name of the locally attached storage device (for example, E:). This is not
the name of the volume in the management group. {volumeName}
Example 23 Windows
cliq clearVssVolumeFlags volumeName=x:
cloneSnapshot
Description
Create one or more SmartClone volumes from a StoreVirtual snapshot. These SmartClone volumes
have all the functionality of normal volumes.
Syntax
cloneSnapshot {login=} { userName= passWord= | groupName= } {snapshotName=}
{volumeName=} [description=]
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The name of the remote snapshot. {snapshotName}
The name of the volume in the management group. {volumeName}
Optional description [description]
Example 24 Windows
cliq cloneSnapshot snapshotName=Snapshot1 volumeName=MyClone1;MyClone2
login=10.0.1.2 userName=admin passWord=secret
Example 25 SSH
cloneSnapshot snapshotName=Snapshot1 volumeName=MyClone1;MyClone2
configureRaid
Description
Reconfigure the RAID setting on a storage system. The storage system cannot be in a management
group.
24 Commands