HP StoreVirtual 4000 Storage - Manual (Page 119)

Example 244 Windows
cliq waitForEvent login=10.0.1.2 userName=admin passWord=secret
Example 245 SSH
waitForEvent
waitForUpdate
Description
Block on a change to the state in the management group.
Syntax
waitForUpdate {login=} { userName= passWord= | groupName= } [receivePort=]
[timetowait=]
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The TCP port to receive the discovery packets (defaults to an unused port if
unspecified). [receivePort]
The maximum amount of time to wait before timing out. [timetowait]
Example 246 Windows
cliq waitForUpdate login=10.1.2.3 userName=admin passWord=secret
Example 247 SSH
waitForUpdate
waitForUpdate 119