HP StoreVirtual 4000 Storage - Manual (Page 38)

Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The SNMP community string. {communityString}
The IP address or host name of the SNMP server. [ipAddress]
An IP address mask for SNMP notification. [ipMask]
An IP address subnet for SNMP notification. [ipSubnet]
Example 53 Windows
cliq createSnmpCommunityString login=10.0.1.3 userName=admin
passWord=secret ipAddress=10.0.10.25 communityString=NewString
Example 54 SSH
createSnmpCommunityString ipAddress=10.0.10.25 communityString=NewString
createSnmpTrapTarget
Description
Create an SNMP Trap Target. The Community String must be the same for all Trap Targets. If no
Trap Targets exists, the Community String is used, otherwise it is ignored and the Community String
of existing Trap Targets is used.
Syntax
createSnmpTrapTarget {login=} { userName= passWord= | groupName= }
{ipAddress=} {version=} {communityString=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The IP address or host name of the SNMP server. {ipAddress}
38 Commands