HP 3PAR Application Software Suite for VMware Licenses - Manual (Page 45)

You have the option of viewing all existing Windows users that have registered credentials, or you
can select a specific user from the list shown in the pull down menu.
A listing of registered credentials is shown for the selected users with fields defined as follows:
•
StoreServ Name—Name of the HP 3PAR StoreServ Storage system.
•
StoreServ ID—System ID for the HP 3PAR StoreServ Storage system.
•
StoreServ User—User name for accessing the HP 3PAR StoreServ Storage system.
•
Windows User—Windows user that created the credentials.
•
Reserved By—If available, displays the component for which the credentials are reserved. If
the credential are cashed via the Plug-in auto login feature, then credentials are valid only for
the Plug-in and are not valid for accessing any other components. To create credential for
auto login purpose, the “Remember Me” check box must be checked when logging onto a
given Storage System.
•
Certificate—If the certificate is available, then Yes is displayed, else, No.
To specify a new Storage System credential:
1.
Click Add.
The HP 3PAR StoreServ Credential Management dialog appears.
Figure 20 HP 3PAR StoreServ credential management
2. Enter the appropriate credential information for the HP 3PAR StoreServ Storage system and
user including the valid password, then click OK.
NOTE: When you add an HP 3PAR StoreServ with IP address, the IP address is translated
to the StoreServ Name and is displayed in the StoreServ List.
You can also remove or validate an entry. However, you can remove only one credential at
a time.
StoreServ Credential tab 45