HP Storage Mirroring V5.1 Software - Manual (Page 169)

19 - 33
Kernel MirOps
Generated
The number of mirror operations transmitted to the target.
Mirroring is completed by transmitting the file system operations
necessary to generate the files on the target. This statistic
indicates the number of file system operations that were
transmitted during the initial mirror. It will continue to increase
until the mirror is complete. Any subsequent remirrors will reset
this field to zero and increment from there.
MirBytes
Generated
The number of mirror bytes transmitted to the target. This is the
number of bytes generated during mirroring. In other words, this
is roughly the amount of traffic being sent across the network that
is generated by the mirror. It does not take into account TCP/IP
overhead (headers and such). Again, any subsequent remirror
will reset this field to zero and increment from there.
FailedMirror
Count
The number of mirror operations that failed due to an error
reading the file from the disk
FailedRep
Count
The number of replication operations that failed due to an error
reading the file from the disk
ActFailCount The number of activation code failures when loading the source
or target. Activation codes can be bad for reasons such as:
expiration of evaluation codes, duplicate codes, incorrect codes,
etc.
TargetOpen
Handles
The number of handles currently open on the target
DriverQueue
Percent
The amount of throttling calculated as a percentage of the stop
replicating limit
Target PeerAddress The IP address of the source machine
Local
Address
The IP address of the target machine.
Ops
Received
The total number of operations received by this machine as a
target since the Storage Mirroring service was loaded
Mirror Ops
Received
The total number of mirror operations received by this machine
as a target since the Storage Mirroring service was loaded. This
number does not reset to zero for remirrors.
Retries The number of retries performed before all operations were
completed
OpsDropped The number of operations skipped during a difference mirror.
During a difference mirror, if Storage Mirroring detects that there
have been no changes to a file, then it will indicate the number of
operations it did not send for this file in this field.
Ops
Remaining
The total number of operations that are left in the target queue
Orphan Files
Removed
The number of orphan files removed from the target machine
Orphan
Directories
Removed
The number of orphan directories removed from the target
machine
Orphan
Bytes
Removed
The number of orphan bytes removed from the target machine
Bytes In
Target
Queue
The number of bytes currently in the system memory queue on
the target
Category Statistic Description