Inserting and removing a sim (select models only) – HP x360 310 G1 Convertible PC User Manual

Page 27

Advertising
background image

HSPA (High Speed Packet Access), which provides access to networks based on the Global

System for Mobile Communications (GSM) telecommunications standard.

EV-DO (Evolution Data Optimized), which provides access to networks based on the code

division multiple access (CDMA) telecommunications standard.

LTE (Long Term Evolution), which provides access to networks supporting LTE technology.

You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile

broadband service. The serial number is printed on a label located on the bottom of your computer.
Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains

basic information about you, such as a personal identification number (PIN), as well as network

information. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband information

provided with your computer or the mobile network operator may provide it separately from the

computer.
For information about inserting and removing the SIM, see the

Inserting and removing a SIM (select

models only) on page 19

section in this chapter.

For information about HP Mobile Broadband and how to activate service with a preferred mobile

network operator, see the HP Mobile Broadband information included with your computer.

Inserting and removing a SIM (select models only)

CAUTION:

To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM, follow these steps:

1.

Shut down the computer.

2.

Close the display.

3.

Disconnect all external devices connected to the computer.

4.

Unplug the power cord from the AC outlet.

5.

Insert the SIM into the SIM slot, and then gently push the SIM into the slot until it is firmly seated.

NOTE:

The SIM in your computer may look slightly different from the illustration in this section.

6.

Reconnect external power.

Connecting to a wireless network 19

Advertising
This manual is related to the following products: