HP Integrity NonStop H-Series - Manual (Page 30)

HP NonStop RPM User’s Guide Page 30 of 47
RPMCNF - VT100 Configuration file Example #3
The example below ADDs 3 nodes \node1, 2, 3; sets the TERM type to VT100 , indicates the 10
busiest processes should be displayed for each node (ENTRIES 10), sets SORT to be BYNODE,
sets critical, warning, and information thresholds, sets the RATE to 10 seconds, and executes a
ZOOM \* command which displays a combined Cpu and PB report that updates every 10 seconds.
!=======================================================
!== RPM VT100 Configuration settings - 08/04/15 10:00:00
!=======================================================
ADD \CENTDIV ! add \node1 to list of nodes
ADD \SOLAR ! add \node2 to list of nodes
ADD \CENTDIV ! add \node3 to list of nodes
SET TERM VT100 ! define default term type, VT100, T6530, TTY
SET ENTRIES 10 ! show top 10 busy processes on each cpu/node
SET SORT BYNODE ! sort across all cpus in each node
SET CRIT 50 ! set Critical alert busy threshold 50%
SET WARN 10 ! set Warning alert busy threshold 10%
SET INFO 1 ! set Info alert busy threshold 1%
SET RATE 10 ! set refresh rate in seconds
ZOOM \* ! show both Cpus and Processes every 10 sec