Creating a luse volume, Creating a luse volume from the ldev detail table, Concatenation list dialog box – HP XP20000XP24000 Disk Array User Manual

Page 22: Figure 3

Advertising
background image

Figure 3 Concatenation List Dialog Box

Note:

A parity group number that starts with a letter E indicates that the parity group consists of one or

more external LUs (for example, E1-1).

Creating a LUSE Volume

WARNING:

LUSE creation is a destructive operation. Move and/or back up your data before proceeding.

There are three ways to create a LUSE volume:

Using the LDEV Detail table (see

Creating a LUSE Volume from the LDEV Detail Table

” on page 22)

Using the LDEV Operation detail (Select an LDEV combo box) (see

Creating a LUSE Volume from the LDEV Operation Detail (Select an LDEV Combo Box)

” on page 24)

Using the Volume Count combo box (see

Creating a LUSE Volume Using the Volume Count Combo Box

” on page 24) (recommended)

Creating a LUSE Volume from the LDEV Detail Table

To create a LUSE volume from the LDEV detail table:

1.

Make sure that Remote Web Console is in Modify mode.

For detailed information about Modify mode, see the HP StorageWorks XP24000 Remote

Web Console User's Guide.

2.

Select a CU number from the LDEV Information tree. The LDEV Detail table displays all LDEVs

in the selected CU.

3.

In the LDEV Detail table, select and right-click the normal LDEVs or LUSE volumes that you want to

form the LUSE volume. This displays the Set LUSE Volume pop-up menu.

4.

Select Set LUSE Volume.

A dialog box is displayed. If the displayed dialog box asks if you want to perform a LUSE

operation on a volume that has a path definition, follow step

a

below. If the displayed dialog

box asks if you want to perform a LUSE operation that will affect more than one SLPR or CLPR,

follow step

b

below. If the displayed dialog box is the Set LUSE Confirmation dialog box,

follow step

c

below.

a.

To perform a LUSE operation on a volume that has a path definition, click OK. If a message

appears and asks if you want to perform a LUSE operation that will affect more than one

SLPR or CLPR, go to step

b

. If this message does not appear, go to step

5

.

22

Performing LUSE Operations

Advertising
This manual is related to the following products: