Glossary, Appendix, Apm (advanced power management) – Asus Notebook PC Hardware User Manual
Page 62: Awg (american wire gauge), Bios (basic input/output system), Bit (binary digit), Boot, Bus master ide
62
A
Appendix
Glossary
ACPI (Advanced Configuration and Power Management Interface)
Modern standard for reducing power usage in computers.
APM (Advanced Power Management)
Modern standard for reducing power usage in computers.
AWG (American Wire Gauge)
NOTE: This table is for general reference only and should not be used as a source of
the American Wire Gauge standard as this table may not be current or complete.
Gauge
Diam
Area
R
I@3A/mm2
AWG
(mm)
(mm2)
(ohm/km)
(mA)
33
0.18
0.026
676
75
0.19
0.028
605
85
32
0.20
0.031
547
93
30
0.25
0.049
351
147
29
0.30
0.071
243
212
27
0.35
0.096
178
288
26
0.40
0.13
137
378
25
0.45
0.16
108
477
Gauge
Diam
Area
R
I@3A/mm2
AWG
(mm)
(mm2)
(ohm/km)
(mA)
24
0.50
0.20
87.5
588
0.55
0.24
72.3
715
0.60
0.28
60.7
850
22
0.65
0.33
51.7
1.0 A
0.70
0.39
44.6
1.16 A
0.75
0.44
38.9
1.32 A
20
0.80
0.50
34.1
1.51 A
0.85
0.57
30.2
1.70 A
BIOS (Basic Input/Output System)
BIOS is a set of routines that affect how the computer transfers data between computer components,
such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’s
read-only memory. BIOS parameters can be configured by the user through the BIOS Setup program.
The BIOS can be updated using the provided utility to copy a new BIOS file into the EEPROM.
Bit (Binary Digit)
Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1.
Boot
Boot means to start the computer operating system by loading it into system memory. When the manual
instructs you to “boot” your system (or computer), it means to turn ON your computer. “Reboot” means
to restart your computer. When using Windows 95 or later, selecting “Restart” from “Start | Shut Down...”
will reboot your computer.
Bus Master IDE
PIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for me-
chanical events. Bus master IDE transfers data to/from the memory without interrupting the CPU. Bus
master IDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.