HP Identity Driven Manager Software Licenses - Manual (Page 146)

4-10
Using the Secure Access Wizard
Using Secure Access Wizard
Logoff period - The period of time (seconds) after which a client will
be considered removed from the port for a lack of activity. Disabled
by default, valid values are 0-999999999, 0 is disabled
Supplicant timeout
- The authentication server response timeout
(default 30 sec). Valid values are 1 - 300.
Server timeout
- The authentication server response timeout (default
30 sec). Valid values are 1-300.
Max requests - The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value is 2.
Re-auth period - The re-authentication timeout (in seconds, default 0),
set to 0 to disable re-authentication. Valid values are 0-999999999.
Client limit - The maximum number of clients to allow on one port
simultaneously, default is 1
Quiet period
- The period of time the switch does not try to acquire a
supplicant. Valid values are 0-65535, the default value is 60 sec.
If a device does not support the selected setting, the value you set will
appear in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.