Capacity enclosure, Rear panel leds and buttons, Base enclosure – HP 9000 Virtual Library System User Manual
Page 211
Capacity Enclosure
Description
Item
Power module 0
1
Expansion controller 0
2
Expansion controller 1
3
SAS port 0, input port
4
Service port (for service only)
5
SAS port 1, output port
6
Power module 1
7
Rear Panel LEDs and Buttons
Base Enclosure
Status
Description
Item
Toggle, where O is Off.
Power switch
1
1
Green = AC power is on and input voltage is normal.
AC Power Good LED
2
Off = AC power is off or input voltage is below the minimum threshold.
Yellow = DC output voltage is out of range or a fan is operating below the minimum
required RPM.
DC-Fan Fault/ Service
Required LED
3
Off = DC output voltage is normal.
Green = The port link is connected.
FC link status (L) LED
4
Off = The port is empty or the link is down.
VLS9200 Disk Array Enclosure Components, LEDs, and Buttons
211